Inicio/Home Speaker Cable : maximum runs

Inicio

 Other Audio References •




Maximum cable lengths for :

NOTE: A comma is used as decimal separator instead of a colon. Multiply the resistance/100 m value by 0.3048 to get a value for resistance/100 feet. Multiply meter lengths by 0.3048 to get lengths in feet.

 

Low Impedance

Longitudes máximas de cable para Baja
 Impedancia, Calidad / Maximum Cable Lengths for Low Impedance, Quality
Results are for a total damping factor of 25, using an amplifier with a damping factor of 400 and signa loss of 0.3 dB. 25 is the minimum damping factor for a "quality installation". For higher quality, specially for bass, the above recommended lengths would be halved.

  

Longitudes máximas de cable para Baja Impedancia, -3 dB / Maximum Cable Lengths for Low Impedance, -3 dB
Results are for a signal loss of 3 dB and are in practice independent of the amplifier damping factor.

 

 

Alta Impedancia / High Impedance

Longitudes máximas de cable para 70V / Maximum Cable Lengths for 70V
Results are for a signal loss of 1 dB. For 3 dB loss, multiply the maximum lengths by 3.5

 


Results are for a signal loss of 1 dB. For 3 dB loss, multiply the maximum lengths by 3.5

 

Related documents »» Data tables for speaker cable

 

•  Other Audio References •

• Back to Top •

• Home •

 

© Copyright 2001-2006 Doctor ProAudio - Todos los Derechos Reservados. Condiciones de uso - All Rights Reserved. Conditions of use