• In-Depth RSS Feed

     Número de visitas: 24014 
    Avance del artículo

    One of the many confusing issues in professional audio is that of loudspeaker power handling. On one side, manufacturers use a variety of terms such as peak, RMS, average or program power. On another side, there exist differing methods to determine the power handling of speaker system or component which yield different results. We will ...
    Avance del artículo

    It not uncommon to have the need to control the volume (dynamics) of a signal in an automated way.

    We may be trying to avoid too high a level that will clip an amplifier or deafen the audience or send a speaker cone excursing to hyperspace. ...
    Avance del artículo

    This article will go through compressor controls and how to use them for a variety of applications. ...
    Avance del artículo

    In this article we'll go through noise gate control and how to use them in different applications. ...
    Avance del artículo

    Measured in ohms (symbol, Ω, upper case Greek letter omega), electrical impedance is defined as the opposition to the flow of alternating current by means of presenting an electrical load. In a loudspeaker, impedance varies with frequency, so manufacturers often publish "impedance curves" showing impedance with frequency for passive units. These curves give us ...
    Avance del artículo

    There are two basic ways to carry an electrical audio signal.


    • The first one is unbalanced. The signal is carried on a two-conductor cable. Unbalanced signal connectors have two pins, such as the RCA (also called Phono and Cinch, commonly used by home hi-fi equipment) and the unbalanced 1/4" (used in musical instruments and semi-professional audio). Multi-pin connectors can also carry unbalanced signal, although they will not use all pins). For example, a three-pin XLR (Cannon) might carry an unbalanced signal, leaving one pin unused.
    ...

    The importance of cables for the connection between the amplifier and the speaker is often controversial. Hi-fi aficionados spend fortunes on cables that promise spectacular results, and our short auditory memory and subjectivity lead many to confirm these improvements in their systems.

    The truth is that there are very few serious studies on the importance of the cable in relation to the perceived sound quality. A cable has impedance (opposition to electric current as a function of frequency), capacitance (behaves to some extent like a capacitor) and inductance (behaves like a coil). However, a few years ago an AES article concluded that the differences between cables were very small in terms of capacitance and inductance, and only recognized the importance of impedance.

    ...
    Avance del artículo

    Constant voltage, high impedance or line transformer systems are often a somewhat confusing concept for professionals used to rock and roll. They are actually very simple to design, among other things because they are intended to be installed by electricians and the like, with little experience in sound systems. In this article we will try to clarify the simple concepts needed to understand this type of system. ...
    Publicado el 08 jun 2020 07:22
    Avance del artículo




    1. What is intelligibility?

    The state or quality of being understood. It can apply to an idea or a writing, but in our context it relates to the spoken word and, less commonly, to music. ...