• Equal loudness contours (Fletcher&Munson)

    The equal loudness contours (often referred to as Fletcher & Munson contours for reason explained below) represent the level that different frequencies need to have in order to be perceived by a listener as having equal loudness. These curves are measured at different perceived loudness levels (phones). Phones are the same as dB SPLs for 1000 Hz, whereas for other frequencies we'll need to apply gain or attenuation for the ear to perceive the different frequencies as being equal in level.

    At low listening levels, the ear has a hard time hearing very low frequencies, and, to a lesser extent, high frequencies as well. As we go up in level, the differences between frequencies even out. We could say the ear's frequency response is "flatter" at high levels than at lower ones. For example, a 50 Hz 60 dB SPL sinewave will be perceived as being some 10 dB lower than a 1000 Hz sinewave with the same SPL. However, a 50 Hz 100 dB sinewave will only be perceived as being some 10 dB lower than a 1000 Hz one of the same SPL.

    The psycoacoustical phenomena of the different sensitivity of the ear to different frequencies and the variation of that "frequency response" (in fact, the contours are like frequency responses of the ear upside down) with changing listening levels was first thoroughly quantified by researchers Fletcher & Munson in the 1930s. Thus, this type of curves are commonly referred to as Fletcher & Munson contours, although these days more up to date and accurate versions are used, such as those by Robertson & Dadson (shown below), or the standards organization ISO.

    Based on this type of contours are the A, B and C frequency weightings, which correspond to low, mid and high listening levels, respectively, and are used to better correlate microphone level readings with human perception.





    Related reading »» Frequency weightings: A, B and C
  • Ad

  • News

    DLIVE goes deeper with firmware V1.9

    Allen & Heath has announced dLive V1.9, reportedly the largest firmware release in the history of their flagship dLive mixing system.

    “With over 45 user-requested features and numerous improvements,... Read more

    Danley and Dynacord announce strategic alignment



    Professional audio brands Danley and Dynacord are teaming up to bring complementary product combinations to the global marketplace.

    In what has been termed... Read more

    Lynx Pro Audio launches XT Series power amplifiers

    XT series is a new generation of amplifiers from Lynx Pro Audio for both touring and install applications that offers a high voltage output combined with a 96 KHz and double-precision... Read more

    RCF announces a new system for the TT+ Series

    Italian audio company RCF introduces the T 515-A speaker and TT 808-AS subwoofer, two powered portable speakers for high-powered portable and installed professional applications. This approach combines the advantages of RCF TT+... Read more
    Etiquetas: rcf 
  • Recent articles

    Intelligibility and its measurement

    1. What is intelligibility?

    The state or quality of being understood. It can apply to an idea or a writing, but in our context it relates to the spoken word and, less commonly, to music.... Read more

    Choosing loudspeaker cable

    The importance of cables for the connection between the amplifier and the speaker is often controversial. Hi-fi aficionados spend fortunes on cables that promise spectacular results, and our short auditory memory and subjectivity lead many to confirm these improvements in their systems.... Read more

    Constant voltage systems (70V, 100V lines)

    Constant voltage, high impedance or line transformer systems are often a somewhat confusing concept for professionals used to rock and roll. They are actually very simple to design, among other things because they are intended to be installed by electricians and the like, with little experience in sound systems. In this article we will try to clarify the simple concepts needed to understand this type of system.... Read more
  • PAcalculate app