• Pink, white and red noise

    The spectra of pink and white noise are often a source of confusion. The difficulty arises from the fact that the spectra of these types of noise (or rather, their graphical representation) will change depending on the type of analyzer that is used.

    Pink noise shows a flat spectrum when measured on a constant percentage bandwidth analyzer (such as a standard 1/3rd octave band RTA), while white noise shows as a straight line with a positive slope of 3 dB/octave and red (or Brownian, but not "brown") noise sports a negative 3 dB/octave slope. However, on an FFT analyzer white noise shows up flat, while pink noise has a downward slope of -3 dB/octave and red noise a slope of -6 dB/octave. This is because FFT uses frequency bins the bandwidth of which is the same number of Hz across the spectrum, so that, psychoacustically, at low frequencies bands are wide and they get narrow as we go up in frequency.

    From a psychoacoustic point of view, the most relevant analyzer is one that shows pink noise as flat (no slope), since this relates more closely to the auditory system, which is akin to a band of one-third octave frequency.

    The top figure shows the theoretical spectra of the three types of noises mentioned here as seen by a constant percentage bandwidth analyzer, the color of the curve denoting the type of noise. Next illustrates the same, but seen by an FFT type analyzer. The lower figure corresponds to an FFT analysis performed on real noise signals (white noise is the green curve here).



    Theoretical white, pink and red noise as seen by an RTA type analyzer



    Theoretical white, pink and red noise as seen by an FFT type analyzer



    White, pink and red noise as seen by a real FFT analysis
  • Ad

  • News

    Pliant Technologies' SmartBoom Headsets

    Pliant Technologies’ line of SmartBoom LITE and SmartBoom PRO headsets reportedly offer "comfort, durability, and outstanding audio performance for professionals... Read more

    Lectrosonics Introduces the MTCR Miniature Time Code Recorder

    Lectrosonics has announced the introduction of a new digital recorder, the MTCR (Miniature Time Code Recorder) for professional use.... Read more

    Powersoft Releases Q-SYS and Crestron Plug-ins for Mezzo Series and Duecanali, Quattrocanali and Ottocanali Series Amplifiers

    Powersoft has released new plug-ins supporting Mezzo Series and its non-DSP install dedicated amplifier platforms ranges for the Q-SYS and Crestron control ecosystems. These free-to-download plug-ins allow for... Read more

    Neutrik introduces the NPS-30W PoE Injector

    Neutrik, supplier of connectivity solutions for audio, video, and data, has announced the debut of the NPS-30W PoE injector. The NPS-30W is the world’s first... Read more
  • Recent articles

    Balanced and unbalanced connections

    There are two basic ways to carry an electrical audio signal.


    • The first one is unbalanced. The signal is carried on a two-conductor cable. Unbalanced signal connectors have two pins, such as the RCA (also called Phono and Cinch, commonly used by home hi-fi equipment) and the unbalanced 1/4" (used in musical instruments and semi-professional audio). Multi-pin connectors can also carry
    ... Read more

    Choosing loudspeaker cable

    The importance of cables for the connection between the amplifier and the speaker is often controversial. Hi-fi aficionados spend fortunes on cables that promise spectacular results, and our short auditory memory and subjectivity lead many to confirm these improvements in their systems.

    The truth is that there are very few serious studies on the importance of the cable in relation to the perceived sound quality. A cable has impedance (opposition to electric current as a function of frequency), capacitance (behaves to some extent like a capacitor) and inductance (behaves like a coil). However, a few years ago an AES article concluded that the differences between cables were very small in terms of capacitance and inductance, and only recognized the importance of impedance.

    Therefore I invite you to leave aside any cable with such an exaggerated price as its promises, and look only at the gauge (thickness, cross-sectional area) of the cable, as far as the electrical characteristics are concerned (then there are important... Read more

    Intelligibility and its measurement

    1. What is intelligibility?

    The state or quality of being understood. It can apply to an idea or a writing, but in our context it relates to the spoken word and, less commonly, to music.... Read more
  • PAcalculate app