• Radial SW8-USB auto-switcher and USB playback interface

    Radial Engineering announced that the SW8-USB, an auto-switcher and USB playback interface, is now shipping.

    The SW8-USB is an eight-channel switching device designed primarily for live concerts where backing tracks are used to reinforce the performance. Should the primary playback source suffer a failure or dropout, the SW8-USB can switch to a backup source. This switching can be done automatically by the SW8-USB, or it can be performed manually using a switch on the front panel or by remote control.

    Typical playback systems require a computer as the digital audio source, along with an audio interface in order to provide analog audio outputs to feed the PA system. For a redundant playback system, the list of equipment required is doubled: two computers and two audio interfaces to pair with them. One of the advantages that the SW8-USB provides over this typical setup is that it allows you to connect directly to your playback computers over USB, eliminating the need for additional audio interfaces.

    The SW8-USB is equipped with two USB connectors and 24bit/192kHz digital audio converters that provide eight channels of audio playback over balanced XLR outputs. Designed to feed the PA system, these mic-level outputs are transformer isolated to eliminate noise from ground loops, and they can also be set to line-level operation. Additional line-level outputs are provided for local monitoring of your playback signals, with the choice of DB25 or 1/4-inch TRS connections.

    In addition to passing audio over USB, the SW8-USB is also able to function as a MIDI interface: providing the ability to use the SW8-USB with show control systems to trigger lighting or video cues, or to control and synchronize audio playback on the primary and backup computers. For larger shows that require more than eight channels of audio playback, up to three SW8-USB units can be linked together for a total of 24 output channels.
  • Ad

  • Recent articles

    Balanced and unbalanced connections

    There are two basic ways to carry an electrical audio signal.


    • The first one is unbalanced. The signal is carried on a two-conductor cable. Unbalanced signal connectors have two pins, such as the RCA (also called Phono and Cinch, commonly used by home hi-fi equipment) and the unbalanced 1/4" (used in musical instruments and semi-professional audio). Multi-pin connectors can also carry
    ... Read more

    Choosing loudspeaker cable

    The importance of cables for the connection between the amplifier and the speaker is often controversial. Hi-fi aficionados spend fortunes on cables that promise spectacular results, and our short auditory memory and subjectivity lead many to confirm these improvements in their systems.

    The truth is that there are very few serious studies on the importance of the cable in relation to the perceived sound quality. A cable has impedance (opposition to electric current as a function of frequency), capacitance (behaves to some extent like a capacitor) and inductance (behaves like a coil). However, a few years ago an AES article concluded that the differences between cables were very small in terms of capacitance and inductance, and only recognized the importance of impedance.

    Therefore I invite you to leave aside any cable with such an exaggerated price as its promises, and look only at the gauge (thickness, cross-sectional area) of the cable, as far as the electrical characteristics are concerned (then there are important... Read more

    Intelligibility and its measurement

    1. What is intelligibility?

    The state or quality of being understood. It can apply to an idea or a writing, but in our context it relates to the spoken word and, less commonly, to music.... Read more
  • PAcalculate app