• Radial SW8-USB auto-switcher and USB playback interface

    Radial Engineering announced that the SW8-USB, an auto-switcher and USB playback interface, is now shipping.

    The SW8-USB is an eight-channel switching device designed primarily for live concerts where backing tracks are used to reinforce the performance. Should the primary playback source suffer a failure or dropout, the SW8-USB can switch to a backup source. This switching can be done automatically by the SW8-USB, or it can be performed manually using a switch on the front panel or by remote control.

    Typical playback systems require a computer as the digital audio source, along with an audio interface in order to provide analog audio outputs to feed the PA system. For a redundant playback system, the list of equipment required is doubled: two computers and two audio interfaces to pair with them. One of the advantages that the SW8-USB provides over this typical setup is that it allows you to connect directly to your playback computers over USB, eliminating the need for additional audio interfaces.

    The SW8-USB is equipped with two USB connectors and 24bit/192kHz digital audio converters that provide eight channels of audio playback over balanced XLR outputs. Designed to feed the PA system, these mic-level outputs are transformer isolated to eliminate noise from ground loops, and they can also be set to line-level operation. Additional line-level outputs are provided for local monitoring of your playback signals, with the choice of DB25 or 1/4-inch TRS connections.

    In addition to passing audio over USB, the SW8-USB is also able to function as a MIDI interface: providing the ability to use the SW8-USB with show control systems to trigger lighting or video cues, or to control and synchronize audio playback on the primary and backup computers. For larger shows that require more than eight channels of audio playback, up to three SW8-USB units can be linked together for a total of 24 output channels.
  • Ad

  • Recent articles


    Pin asignments for an assortment of connectors: XLR, 1/4" (jack), 1/8" (minijack), SpeakON, DB25, DMX ...

    ... Read more

    Octaves and third-octaves

    Octaves, thirds of octaves and decades are divisions of the spectrum used in audio, since they work in the same way as the ear, increasing their width in Hertz as frequency increases, and decreasing it when frequency decreases. They are used for the definition of the width of filters, as well as for the spectral analysis.... Read more

    Parallel and series connections: description and calculations

    In this article we'll explain impedance calculations as simply as possible, as well as describe the different types of connection.... Read more
  • PAcalculate app