• Parallel and series connections: description and calculations

    Series-parallel connection

    If we combine series connections with parallel ones we have the so-called "series-parallel" connections. They are normally used for public address systems or background music when we have a number of speakers that we want to connect to an amplifier and neither the serial nor the parallel connection gives us a total impedance that matches our needs. To calculate the resulting impedance, the speakers connected in series are grouped together, and then the parallel sum of all these impedances is calculated.

    The illustration shows it more simply. We have pairs of 8Ω (eight-ohm) speakers connected in series. The pairs are connected to each other in parallel. We calculate the total impedances of each pair of speakers, which, since they are in series, is only 8+8 ohms, giving a total of 16 ohms per pair. Then we only have to calculate three 16-ohm impedances in parallel, which is simply 16/3 (that is, 5.33 ohms) following the formula given above.

    This type of connection shares the disadvantages of series connections, with the particularity that if a speaker is disconnected or burnt (open circuit), only the elements connected in series to it would also lose their signal. For applications where series-parallel speaker connections would be used, a speaker system with an input transformer (70 or 100V line) is an alternative that delivers high practical parallel connections.

    Addendum: Impedances summing in multi-way passive loudspeakers

    In a speaker with a passive crossover filter, although the different frequency sections are in parallel, the impedance summing formula should not be used to calculate the total impedance of the speakers. This happens because there is impedance separation, so we can consider that each band's impedance is independent from the others. This happens because what the crossover filter does is to increase the impedance outside the passband of the component. For example, at low frequencies the impedance of the combination HF driver+filter makes the value of the impedance in those frequencies very high, and therefore negligible.

  • Ad

  • News

    d&b introduces the XSL System compact line array

    d&b audiotechnik's top of the range line array family, the SL-Series, has announced the arrival of its smallest sibling - the XSL System. The XSL System comprises installation specific and mobile touring variants. XSLi for permanent installations and XSL for mobile use. Both... Read more

    DLIVE goes deeper with firmware V1.9

    Allen & Heath has announced dLive V1.9, reportedly the largest firmware release in the history of their flagship dLive mixing system.

    “With over 45 user-requested features and numerous improvements,... Read more

    Danley and Dynacord announce strategic alignment

    Professional audio brands Danley and Dynacord are teaming up to bring complementary product combinations to the global marketplace.

    In what has been termed... Read more

    Lynx Pro Audio launches XT Series power amplifiers

    XT series is a new generation of amplifiers from Lynx Pro Audio for both touring and install applications that offers a high voltage output combined with a 96 KHz and double-precision... Read more
  • Recent articles

    Intelligibility and its measurement

    1. What is intelligibility?

    The state or quality of being understood. It can apply to an idea or a writing, but in our context it relates to the spoken word and, less commonly, to music.... Read more

    Choosing loudspeaker cable

    The importance of cables for the connection between the amplifier and the speaker is often controversial. Hi-fi aficionados spend fortunes on cables that promise spectacular results, and our short auditory memory and subjectivity lead many to confirm these improvements in their systems.... Read more

    Constant voltage systems (70V, 100V lines)

    Constant voltage, high impedance or line transformer systems are often a somewhat confusing concept for professionals used to rock and roll. They are actually very simple to design, among other things because they are intended to be installed by electricians and the like, with little experience in sound systems. In this article we will try to clarify the simple concepts needed to understand this type of system.... Read more
  • PAcalculate app