• DirectOut PRODIGY Series Now Available With Ember+ Network-Based Protocol

    DirectOut's PRODIGY Series of DSP processors was designed to add support of third party control protocols, easing integration into projects where independent or existing control software or systems are already in place. So far control of PRODIGY.MC and PRODIGY.MP was only possible via the front panel touch display and the remote control software globcon, using its native JSON API.

    With the latest update, Ember+ has now been added as the first network based third party protocol. It is an open control protocol based on an initiative of the Lawo Group and is already used by companies such as Riedel, SSL and Lawo. The DirectOut implementation allows controling the configuration, the settings of the Microphone Preamp and the Routing Matrix including channel labeling, as well as monitoring the status of the device.

    “Ember+ opens up the range of control systems that can interact with our PRODIGY devices. For example popular and widespread software like hi, VSM or KSC may be used. Even direct access from a mixing console can be possible,” says Claudio Becker-Foss, CEO/CTO of DirectOut, “Actually, we´ve already successfully tested our implementation with Broadcast Solutions´ control software hi, without any changes required in the software.”

    Globcon can be used at the same time to control other functions, e.g. the DSP section of PRODIGY.MP.

    Ember+ will be available as a paid software option for the PRODIGY Series and can be purchased separately per device.
  • Ad

  • Recent articles

    Power amplifier modes : stereo, parallel and bridge mono

    In general, two-channel power amplifiers for professional use default to stereo mode. That is, each amplifier channel receives a signal from its input connector and its volume is controlled by... Read more

    Y-cables, looping audio signals through

    This article will explain loop-though connections and "y-cables" for analog audio signals.

    To obtain one or more copies of a signal (for example, to distribute the signal from a mixer to various self-powered speakers or power amplifiers) we use parallel connections. To do this we simply connect each terminal (pin) of the connectors in parallel. That is, 1 to 1, 2 to 2 and 3 to 3 (or tip to tip, ring to ring and sleeve to sleeve in a TRS connector). When we split a signal in two in this way, we refer to a "Y-cable" or "Y" connection, since the division of a signal in two looks like letter "y". Contrary to what it may seem, a y-cable is not a technically incorrect solution, but a correct way of splitting the audio signal. In fact, when a self-powered loudspeaker system or one channel of... Read more

    Pinouts

    Pin asignments for an assortment of connectors: XLR, 1/4" (jack), 1/8" (minijack), SpeakON, DB25, DMX ...


    ... Read more
  • PAcalculate app