• Pinouts

    Pin asignments for an assortment of connectors: XLR, 1/4" (jack), 1/8" (minijack), SpeakON, DB25, DMX ...

    XL3 (Audio)

    Male Female
    XL3 macho XL3 hembra
    (as seen from the front)

    1 = GND (ground)
    2 = +
    3 = −

    (as per AES14-1992 standard. You may find older models with reverse assignment for pins 2 and 3)

     Top

    1/4" (6,3 mm) "jack"

    TRS TS
    TRS TS
    T (tip ) = + / Left.
    R (ring) = − / Right.
    S (sleeve) = GND (ground)

    (TRS connector can be used for balanced mono as well as unbalanced stereo)

     Top

    1/8" (3,5 mm) "minijack"

    TRS TRRS
    TRS TRRS

    T = left
    R = right
    S = GND (ground)
    CTIA (Apple, most Android)
    T = left
    R1 = right
    R2 = GND (ground)
    S = mic/control

    OMTP (ZTE, Oppo, HTC, models for China...)

    T = left
    R1 = right
    R2 = mic/control
    S = GND (ground)

     Top

    SpeakON NL4

     Top

    SpeakON NL8

     Top

    DB25, T*sc*am/AES59-2012

    DB25, Tascam
    Pin
    1 OUT, Ch. 7-8, +
    2 OUT, Ch. 7-8, GND (ground)
    3 OUT, Ch. 5-6, −
    4 OUT, Ch. 3-4, +
    5 OUT, Ch. 3-4, GND (ground)
    6 OUT, Ch. 1-2, −
    7 IN, Ch. 7-8, +
    8 IN, Ch. 7-8, GND (ground)
    9 IN,Ch. 5-6, −
    10 IN, Ch. 3-4, +
    11 IN, Ch. 3-4, GND (ground)
    12 IN, Ch. 1-2, −
    13 ―――
    14 OUT, Ch. 7-8, −
    15 OUT, Ch. 5-6, +
    16 OUT, Ch. 5-6, GND (ground)
    17 OUT, Ch. 3-4, −
    18 OUT, Ch. 1-2, +
    19 OUT, Ch. 1-2, GND (ground)
    20 IN, Ch. 7-8, −
    21 IN, Ch. 5-6, +
    22 IN, Ch. 5-6, GND (ground)
    23 IN, Ch. 3-4, −
    24 IN, Ch. 1-2, +
    25 IN, Ch. 1-2, GND (ground)

    (SEEN FROM THE FRONT)

     Top

    DB25, Y*m*ha

    DB25, Yamaha
    Pin
    1 IN, Ch. 1-2, +
    2 IN, Ch. 3-4, +
    3 IN, Ch. 5-6, +
    4 IN, Ch. 7-8, +
    5 OUT, Ch. 1-2, +
    6 OUT, Ch. 3-4, +
    7 OUT, Ch. 5-6, +
    8 OUT, Ch. 7-8, +
    9 ―――
    10 1-2, GND (ground)
    11 ―――
    12 3, GND (ground)
    13 4, GND (ground)
    14 IN, Ch. 1-2, −
    15 IN, Ch. 3-4, −
    16 IN, Ch. 5-6, −
    17 IN, Ch. 7-8, −
    18 OUT, Ch. 1-2, +
    19 OUT, Ch. 3-4, +
    20 OUT, Ch. 5-6, +
    21 OUT, Ch. 7-8, +
    22 5, GND (ground)
    23 6, GND (ground)
    24 7, GND (ground)
    25 8, GND (ground)

    (SEEN FROM THE FRONT)

    DB25, Analog

    DB25, Analog
    Pin
    1 Ch. 8, +
    2 Ch. 8, GND (ground)
    3 Ch. 7, −
    4 Ch. 6, +
    5 Ch. 6, GND (ground)
    6 Ch. 5, −
    7 Ch. 4, +
    8 Ch. 4, GND (ground)
    9 Ch. 3, −
    10 Ch. 2, +
    11 Ch. 2, GND (ground)
    12 Ch. 1, −
    13 ―――
    14 Ch. 8, −
    15 Ch. 7, +
    16 Ch. 7, GND (ground)
    17 Ch. 6, −
    18 Ch. 5, +
    19 Ch. 5, GND (ground)
    20 Ch. 4, −
    21 Ch. 3, +
    22 Ch. 3, GND (ground)
    23 Ch. 2, −
    24 Ch. 1, +
    25 Ch. 1, GND (ground)

    (SEEN FROM THE FRONT)

     Top

    XL3 (Lighting, DMX)

    Male Female
    XL3 macho XL3 hembra
    (as seen from the front)

    1 = GND (ground)
    2 = −
    3 = +

    (If a termination resistor is required, connect it between pin 2 and 3)

     Top

    XL5 (Lighting, DMX)

    Male Female
    XL3 macho XL3 hembra
    (as seen from the front)

    1 = GND (ground)
    2 = Data 1 −
    3 = Data 1 +
    4 = Data 2 −
    5 = Data 2 +

    (If a termination resistor is required, connect it between pin 2 and 3)

     Top

  • Ad

  • News

    inMusic acquires ArKaos

    Fort Lauderdale, FL USA (October 27, 2020) inMusic, the has announced the acquisition of ArKaos.

    Founded in 1996, ArKaos specializes in video processing technologies,... Read more

    Meyer Sound launches Spacemap Go, a tool for spatial sound design and mixing

    Meyer Sound has officially released Spacemap® Go for spatial sound design and mixing. Available now as a free app for Apple iPad (any iPad capable of running the latest iPadOS), Spacemap... Read more

    Bose unveils L1 Pro family


    These three new portable Bose PA systems are designed to give artists choices, suit different styles and audiences, and provide an solution for creators reintroducing live music and sound experiences into venues and online platforms across... Read more

    ClearOne BMA 360 beamforming microphone array ceiling tile

    ClearOne (NASDAQ:CLRO), provider of audio and visual communication solutions, has announced its new BMA 360, reportedly the world’s most technologically advanced Beamforming Microphone Array Ceiling Tile.

    The ClearOne BMA 360 is the world’s first truly wideband,... Read more
  • Recent articles

    Power amplifier modes : stereo, parallel and bridge mono

    In general, two-channel power amplifiers for professional use default to stereo mode. That is, each amplifier channel receives a signal from its input connector and its volume is controlled by... Read more

    Basic electricity formulas

    Although it not specific to sound, we include this document with some basic electricity formulas. They can be found in any electricity textbook, but we have added them to the DoPA Library for reference.

    Ohm's law

    The most basic formulas derive from Ohm's law, which specifies that the electric current between two points is proportional to the potential difference (voltage) between them and inversely proportional to the resistance between them. The formula is:
    V
    I = ———
    Z


    where I is the current (intensity) in amps and V is the voltage in volts. Since we use alternating current in audio, we have replaced resistance with impedance (Z, and this could also be resistance R), measured in ohms. Clearing Z and V we have these other two formulas:

    V
    Z = ———
    ... Read more

    Y-cables, looping audio signals through

    This article will explain loop-though connections and "y-cables" for analog audio signals.

    To obtain one or more copies of a signal (for example, to distribute the signal from a mixer to various self-powered speakers or power amplifiers) we use parallel connections. To do this we simply connect each terminal (pin) of the connectors in parallel. That is, 1 to 1, 2 to 2 and 3 to 3 (or tip to tip, ring to ring and sleeve to sleeve in a TRS connector). When we split a signal in two in this way, we refer to a "Y-cable" or "Y" connection, since the division of a signal in two looks like letter "y". Contrary to what it may seem, a y-cable is not a technically incorrect solution, but a correct way of splitting the audio signal. In fact, when a self-powered loudspeaker system or one channel of... Read more
  • PAcalculate app