KV2 enhances SL Series with new SL6.10 subwoofer

The SL Series from KV2 was designed as a powerful, slimline speaker that could either be integrated directly into walls or other surfaces, or simply present a discreet profile when mounted directly on the wall, or even flown. Indeed, the SL412 is used for the iconic Ibiza club, Amnesia as well as several West End and Broadway theatre shows, along with the Vienna Volksoper opera house in Austria. KV2 has recently enhanced this range with the addition of the SL6.10 subwoofer which replaces the SL2.15.

Measuring just 350mm (13.78”) deep and designed to integrate aesthetically with the SL412, the SL6.10 produces bass from its ultra-slim cabinet design. Bass response is further enhanced by doubling or tripling the cabinets, particularly when the SL6.10 is used against or within a wall. It its also said to combine acoustically with the ultra-low frequency VHD1.21 and 2.21 subwoofers as part of an active five-way system if required.

The 6 x 10-inch front loaded bass drivers, with a 2-inch voice coil assembly and a ferrite magnetic motor structure, deliver very high dynamic range and a quality of articulation not normally achievable through larger mass, conventionally sized subwoofer cones, says KV2. Up to three SL6.10 subwoofers can be powered from one channel of a VHD3200/3200D amplifier, which represents considerable savings compared to its predecessor which required an amp channel to power two units, as impedance is now 12Ω as opposed to 8Ω.

SL6.10 offers a range of wall-mounting, suspension and ground stacking options, or it can be installed directly into walls and surfaces where space or visual aesthetics are at a premium. The units may also be designed and supplied with custom colours, grille templates and logo.

Finally, the SL range now features the SL3000D and VHD3200D amplifiers which incorporate the KV2 Control & Diagnostics tool, meaning that the SL6.10 may be set up, controlled and managed entirely remotely if required.

Specifications:
- Max SPL Long-term: 129dB
- Max SPL Peak: 132dB
- Frequency Response (-10dB): 45Hz to 500Hz
- Sensitivity: 100dB 1W/1m
- Impedance: 12Ω
- Crossover Point: 70Hz to 200Hz
- Acoustic Design: direct-Radiating with Bass Reflex
- Subwoofer Amplifier Requirement: 1800W / 3x SL6.10 (1 ch-VHD3200 amp)
- Dimensions: 960 mm x 1080 mm x350 mm
- Weight: 84 kg