The LF section uses two 10-inch transducers with 3-inch coils, while the mid-frequency section utilizes two 6.5-inch transducers with 2-inch voice coils, providing up to 104dB/ 1 W/1 M sensitivity. Lastly, the high-frequency section makes use of dual 1.4-inch exit compression drivers with 2.5-inch voice coils and titanium diaphragm coupled to a wave guide. Neodymium magnets are used for all of the transducer complement. Sensitivity is 109dB 1W/1m, while maximum SPL is 140dB peak.
The plywood cabinet is equipped with a steel and aluminum alloy rigging system that allows for a splay angle adjustment from 0° to 10°.
Specifications:
- Frequency response: 35 Hz-19 kHz (-3 dB)
- Coverage angles: 100° (Horizontal), 10° (Vertical)
- Max SPL:
LF: 127 dB Continuous, 133 dB Peak
MF: 130 dB Continuous, 135 dB Peak
HF: 134 dB Continuous, 140 dB Peak
- Sensitivity (1W/1m): 98 dB, 106 dB, 109 dB (LF, MF, HF)MF: 130 dB Continuous, 135 dB Peak
HF: 134 dB Continuous, 140 dB Peak
- Nominal impedance: 2x8Ω, 16Ω, 16Ω (LF, MF, HF)
- RMS power handling: 600W/600W/240W (LF, MF, HF)
- I/O connectors: waterproof PLT 8-pin
- Recommended x-over frequencies: 400hz, 1.2khz
- Dimensions: 820 mm (32.3") x 400mm (15.8") x 308 mm (12.1) WxDxH
- Weight: 43 Kg (94.8 lb)